This commit is contained in:
parent
2d2e42c4dd
commit
a19d5b5a72
|
|
@ -5,88 +5,92 @@ set -euo pipefail
|
|||
CKPT_ROOT="/home/test/checkpoints/q3-32b-ds4" # 若实际是 .../checkpoint-62/global_step62，请把 CKPT_ROOT 改成 .../checkpoint-62
|
||||
TAG="global_step62"
|
||||
HOSTS=(tn01 tn02 tn03 tn04 tn05 tn06)
|
||||
OUT_DIR="${CKPT_ROOT}/merged-${TAG}"
|
||||
AGGREGATOR_HOST="tn06" # 本脚本运行/汇总所在机器
|
||||
EXPECTED_SHARDS_PER_HOST=4 # 每机应写出分片数（按你的并行布局）
|
||||
MAX_SHARD_SIZE="5GB"
|
||||
|
||||
# 预检控制：总分片数（通常=总写出 rank 数，如 6 节点×4 GPU=24），最小每机分片数（按你布局调）
|
||||
EXPECTED_TOTAL_SHARDS=24
|
||||
MIN_SHARDS_PER_HOST=1
|
||||
STRICT_PRECHECK=true # true: 若总分片≠期望则直接退出；false: 仅告警但继续
|
||||
|
||||
STRICT_PRECHECK=true # true: 预检不通过就退出；false: 仅告警
|
||||
SSH_OPTS="-o BatchMode=yes -o StrictHostKeyChecking=accept-new -o ConnectTimeout=8"
|
||||
RSYNC_OPTS="-a --info=progress2 --human-readable --partial --inplace"
|
||||
# ====================
|
||||
|
||||
export OUT_DIR # 让后面的 Python 自检拿得到
|
||||
# ===== 派生参数（一般不用改） =====
|
||||
EXPECTED_TOTAL_SHARDS=$(( EXPECTED_SHARDS_PER_HOST * ${#HOSTS[@]} ))
|
||||
STAGING_BASE="${CKPT_ROOT}/_staging"
|
||||
STAGING_TAG_DIR="${STAGING_BASE}/${TAG}"
|
||||
OUT_DIR="${CKPT_ROOT}/merged-${TAG}"
|
||||
export OUT_DIR
|
||||
# =================================
|
||||
|
||||
echo "== 预检查 SSH =="
|
||||
for h in "${HOSTS[@]}"; do
|
||||
ssh ${SSH_OPTS} "$h" "true" >/dev/null || { echo "!! 无法免密 SSH 到 $h"; exit 1; }
|
||||
done
|
||||
|
||||
echo "== 0/4 逐节点分片预检（只统计 ${CKPT_ROOT}/${TAG} 下的 *model_states.pt 文件） =="
|
||||
total=0
|
||||
declare -A host_cnt
|
||||
echo "== 0/5 逐节点分片预检（统计各机 ${CKPT_ROOT}/${TAG} 下的 *model_states.pt）=="
|
||||
remote_total=0
|
||||
agg_cnt=0
|
||||
for h in "${HOSTS[@]}"; do
|
||||
# 只认文件，不认目录；限制在 TAG 这一层
|
||||
c=$(ssh ${SSH_OPTS} "$h" "find '${CKPT_ROOT}/${TAG}' -maxdepth 1 -type f -name '*model_states.pt' 2>/dev/null | wc -l" || echo 0)
|
||||
c=$(echo "$c" | tr -d ' ')
|
||||
host_cnt["$h"]=$c
|
||||
total=$(( total + c ))
|
||||
printf " - %-8s: %s 分片\n" "$h" "$c"
|
||||
if (( c < MIN_SHARDS_PER_HOST )); then
|
||||
echo "!! 预警：$h 分片仅 $c 个 (< ${MIN_SHARDS_PER_HOST})，该节点可能未写出或路径不同" >&2
|
||||
fi
|
||||
done
|
||||
echo " - 汇总分片数（未同步前）：$total"
|
||||
|
||||
if [[ -n "${EXPECTED_TOTAL_SHARDS:-}" ]]; then
|
||||
if (( total != EXPECTED_TOTAL_SHARDS )); then
|
||||
echo "!! 分片总数($total) ≠ 期望(${EXPECTED_TOTAL_SHARDS})，很可能缺片或路径不一致" >&2
|
||||
if [[ "${STRICT_PRECHECK}" == "true" ]]; then
|
||||
echo "!! STRICT_PRECHECK 开启：中止合并，请先排查缺片节点" >&2
|
||||
exit 2
|
||||
else
|
||||
echo ">> 严格校验关闭：继续执行（可能在合并/加载时失败）" >&2
|
||||
if [[ "$h" == "$AGGREGATOR_HOST" ]]; then
|
||||
agg_cnt=$c
|
||||
else
|
||||
remote_total=$(( remote_total + c ))
|
||||
# 每台机最简单的 sanity：至少应有 EXPECTED_SHARDS_PER_HOST 个
|
||||
if (( c < EXPECTED_SHARDS_PER_HOST )); then
|
||||
echo "!! 预警：$h 分片仅 $c 个（期望 ${EXPECTED_SHARDS_PER_HOST}）" >&2
|
||||
fi
|
||||
fi
|
||||
fi
|
||||
done
|
||||
expected_remote_total=$(( EXPECTED_TOTAL_SHARDS - EXPECTED_SHARDS_PER_HOST ))
|
||||
echo " - 远端合计（不含 ${AGGREGATOR_HOST}）：$remote_total（期望 ${expected_remote_total}）"
|
||||
echo " - ${AGGREGATOR_HOST} 自身：$agg_cnt（期望 ${EXPECTED_SHARDS_PER_HOST}）"
|
||||
|
||||
echo "== 1/4 同步各节点的 ${TAG} 目录（带进度）=="
|
||||
mkdir -p "${CKPT_ROOT}/${TAG}"
|
||||
LOCAL_HOST="$(hostname -s || hostname)"
|
||||
precheck_ok=true
|
||||
if (( remote_total != expected_remote_total )); then
|
||||
echo "!! 远端总分片不等：实际 ${remote_total} / 期望 ${expected_remote_total}" >&2
|
||||
precheck_ok=false
|
||||
fi
|
||||
if (( agg_cnt < EXPECTED_SHARDS_PER_HOST )); then
|
||||
echo "!! ${AGGREGATOR_HOST} 本机分片不足：实际 ${agg_cnt} / 期望 ${EXPECTED_SHARDS_PER_HOST}" >&2
|
||||
precheck_ok=false
|
||||
fi
|
||||
if [[ "${STRICT_PRECHECK}" == "true" && "${precheck_ok}" == "false" ]]; then
|
||||
echo "!! STRICT_PRECHECK 开启：预检不通过，停止执行" >&2
|
||||
exit 2
|
||||
fi
|
||||
[[ "${precheck_ok}" == "true" ]] && echo "OK: 预检通过（远端=$(remote_total)、本机=${agg_cnt}，总计期望=${EXPECTED_TOTAL_SHARDS}）" || echo "WARN: 预检存在告警，继续执行..."
|
||||
|
||||
echo "== 1/5 准备 staging 目录（干净环境）=="
|
||||
rm -rf "${STAGING_TAG_DIR}"
|
||||
mkdir -p "${STAGING_TAG_DIR}"
|
||||
|
||||
echo "== 2/5 收集分片到 staging =="
|
||||
for h in "${HOSTS[@]}"; do
|
||||
if [[ "$h" == "$LOCAL_HOST" ]]; then
|
||||
echo " - 跳过本机 $h"
|
||||
continue
|
||||
fi
|
||||
if ssh ${SSH_OPTS} "$h" "test -d '${CKPT_ROOT}/${TAG}'"; then
|
||||
echo " - 从 $h 拉取 ${CKPT_ROOT}/${TAG}/"
|
||||
echo " - 收集 ${h}:${CKPT_ROOT}/${TAG}/ -> ${STAGING_TAG_DIR}/"
|
||||
rsync ${RSYNC_OPTS} -e "ssh ${SSH_OPTS}" \
|
||||
"${h}:${CKPT_ROOT}/${TAG}/" "${CKPT_ROOT}/${TAG}/" || true
|
||||
"${h}:${CKPT_ROOT}/${TAG}/" "${STAGING_TAG_DIR}/" || true
|
||||
else
|
||||
echo " - $h 无 ${CKPT_ROOT}/${TAG}，跳过"
|
||||
echo " - ${h} 无 ${CKPT_ROOT}/${TAG}，跳过"
|
||||
fi
|
||||
done
|
||||
|
||||
echo "== 2/4 统计与校验分片文件（本机聚合后） =="
|
||||
# 只认文件，不认目录；用一次 find 去重，避免重复计数
|
||||
mapfile -t SHARDS < <(find "${CKPT_ROOT}/${TAG}" -maxdepth 1 -type f -name "*model_states.pt" | sort -u)
|
||||
echo "== 3/5 在 staging 校验总分片数（应为 ${EXPECTED_TOTAL_SHARDS}）=="
|
||||
mapfile -t SHARDS < <(find "${STAGING_TAG_DIR}" -maxdepth 1 -type f -name "*model_states.pt" | sort -u)
|
||||
CNT=${#SHARDS[@]}
|
||||
echo " - 发现 model_states 分片文件数：${CNT}"
|
||||
if [[ "${CNT}" -eq 0 ]]; then
|
||||
echo "!! 未检测到任何 *model_states.pt；请在各机上 ls 看看 ${CKPT_ROOT}/${TAG} 的实际文件名" >&2
|
||||
exit 1
|
||||
fi
|
||||
# 简单健壮性检查：分片数至少不低于主机数（经验性检查）
|
||||
if [[ "${CNT}" -lt "${#HOSTS[@]}" ]]; then
|
||||
echo "!! 分片数(${CNT}) < 主机数(${#HOSTS[@]})，可能有节点没同步到分片，继续可能失败" >&2
|
||||
echo " - staging 中发现分片数：${CNT}"
|
||||
if (( CNT != EXPECTED_TOTAL_SHARDS )); then
|
||||
echo "!! 分片总数不等：staging 实际 ${CNT} / 期望 ${EXPECTED_TOTAL_SHARDS}。请检查是否缺片或命名不一致。" >&2
|
||||
exit 3
|
||||
fi
|
||||
|
||||
echo "== 3/4 合并为 safetensors 到：${OUT_DIR} =="
|
||||
echo "== 4/5 合并为 safetensors 到：${OUT_DIR} =="
|
||||
mkdir -p "${OUT_DIR}"
|
||||
|
||||
# 先探测 zero_to_fp32.py 是否支持新参数；不支持就走 API
|
||||
# 探测 zero_to_fp32.py 是否支持新参数；不支持就用 API
|
||||
USE_Z2FP32_SCRIPT=false
|
||||
if [[ -f "${CKPT_ROOT}/zero_to_fp32.py" ]]; then
|
||||
if python "${CKPT_ROOT}/zero_to_fp32.py" --help 2>&1 | grep -q -- "--safe_serialization"; then
|
||||
|
|
@ -96,7 +100,7 @@ fi
|
|||
|
||||
if $USE_Z2FP32_SCRIPT; then
|
||||
python "${CKPT_ROOT}/zero_to_fp32.py" \
|
||||
"${CKPT_ROOT}" \
|
||||
"${STAGING_BASE}" \
|
||||
"${OUT_DIR}" \
|
||||
--tag "${TAG}" \
|
||||
--safe_serialization \
|
||||
|
|
@ -105,7 +109,7 @@ else
|
|||
python - <<PY
|
||||
from deepspeed.utils.zero_to_fp32 import convert_zero_checkpoint_to_fp32_state_dict
|
||||
convert_zero_checkpoint_to_fp32_state_dict(
|
||||
checkpoint_dir=r"${CKPT_ROOT}",
|
||||
checkpoint_dir=r"${STAGING_BASE}",
|
||||
output_dir=r"${OUT_DIR}",
|
||||
tag=r"${TAG}",
|
||||
safe_serialization=True,
|
||||
|
|
@ -115,12 +119,12 @@ print("合并完成：", r"${OUT_DIR}")
|
|||
PY
|
||||
fi
|
||||
|
||||
echo "== 3.1 拷贝 config/tokenizer 工件（如存在）=="
|
||||
echo "== 4.1 拷贝 config/tokenizer 工件（如存在）=="
|
||||
for f in config.json generation_config.json tokenizer_config.json tokenizer.json merges.txt vocab.json special_tokens_map.json added_tokens.json; do
|
||||
[[ -f "${CKPT_ROOT}/${f}" ]] && cp -n "${CKPT_ROOT}/${f}" "${OUT_DIR}/"
|
||||
done
|
||||
|
||||
echo "== 4/4 自检（索引与 config）=="
|
||||
echo "== 5/5 自检（索引与 config）=="
|
||||
python - <<'PY'
|
||||
import os, json, sys
|
||||
out_dir = os.environ.get("OUT_DIR")
|
||||
|
|
@ -129,7 +133,6 @@ if os.path.exists(idx):
|
|||
with open(idx) as f: j = json.load(f)
|
||||
print(f"OK: 找到 safetensors 索引：{idx}（参数条目 {len(j.get('weight_map', {}))}）")
|
||||
else:
|
||||
# 单分片时没有 index.json，属于正常情况
|
||||
print("NOTE: 未找到 model.safetensors.index.json（可能是单分片）")
|
||||
try:
|
||||
from transformers import AutoConfig
|
||||
|
|
|
|||
Loading…
Reference in New Issue